|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Speedo » Post Reply
|
Richie |
posted on 19th Dec 07 at 19:54 |
You will need to run the red/blue wire to the back of the clocks... not sure what pin it is though. | |
luke85 |
posted on 19th Dec 07 at 18:51 |
yeah a standard corsa one will do you, I bought mine new from vauxhall because it wasnt too expensive. youll need the plug to go into it from a scrap yard though | |
byrnie_2004 |
posted on 19th Dec 07 at 17:28 |
where can you get a transducer from? | |
OliSteadman |
posted on 19th Dec 07 at 14:09 |
iv got the tranducer it has a brown black and red/blue coming from it, it doesn't have the wires coming from the plug as it used to be cable driven. So does all three wires go to the plug on the back of the clocks, if so which pins any1 know???? | |
Torsa g |
posted on 19th Dec 07 at 14:05 |
Where the speedo cable attaches onto the gear box you need to replace this with a tranducer, which will have the black,red and blue/ red wires coming out of it, take these wires upto the back off the dash then wire them into the back off the dash which should already have these wires on the block | |
OliSteadman |
posted on 19th Dec 07 at 13:59 |
As above need to wire my speedo in but needs to be retro wired as the engine clocks and gearbox are x16xe items and the car used to be a 1.4 8v with cable driven clock they are now electronic. |