|
Warren G
|
posted on 1st Jul 07 at 21:31 |
quad driver module - ECU/earth fault
|
keltec
|
posted on 1st Jul 07 at 18:54 |
Will give it a try bud, also is this related to the speedo not working as this is a cable driven one?
|
Superlite Ltd.
|
posted on 1st Jul 07 at 18:29 |
uh oh! Fault code 24 again.
Basically the car doesn't know that its not moving so it doesn't operate the IAC valve. Start the car with the throttle open and it should run.
Check for a break in the VSS feed to the ECU. Your looking for a blue/brown wire :)
|
keltec
|
posted on 1st Jul 07 at 18:26 |
Looking for a bit of guidance.
Went out in the car today and it seemed to be revving low, then noticed the speedo stopped working. got it back to the house to check the cable but it seems fine.
Now it won't run, starts fine but cuts out, Diagnostics come up with vechicle speed sensor and Quad driver module.
Any ideas, i've tried resetting ecu but still doing it.
All suggestions welcome as it's doing my nut in now.
Cheers
|