|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » standard cams with tb's » Post Reply
|
Vaux Lad |
posted on 19th Jun 07 at 00:01 |
You might/will need cut the firewall to fit long trumpets in a nova bay. | |
bieransri |
posted on 18th Jun 07 at 21:09 |
wasnt sure what lengths they come in, cheers though. suppose dave a will enlighten me :lol: | |
Warren G |
posted on 18th Jun 07 at 21:04 |
erm 60mm trumpets? | |
bieransri |
posted on 18th Jun 07 at 20:57 |
i thought the cams would be ok, strange that the length of the trumpets have that effect. is there a sort of intermediate? | |
Warren G |
posted on 18th Jun 07 at 20:53 |
longer trumpets = more torque less top end power i think | |
bieransri |
posted on 18th Jun 07 at 20:37 |
what factors effect the torque? would it be silly to use long trumpets on the 1.4/1.6 head combo? | |
Robin |
posted on 18th Jun 07 at 20:27 |
I gained 14bhp on an inletted engine, going from 1.4 to 1.6. | |
Warren G |
posted on 18th Jun 07 at 20:22 |
quote: cant see me adding 20bhp from just upping my 1400 to 1600, then id have ruffley 140bhp from just an inlet and exhasut i think the 1400 makes bigger gains in power from mods, but 1600 is alway going to be better tbh | |
bieransri |
posted on 18th Jun 07 at 20:01 |
he's a supplier of omex so probably that | |
Vaux Lad |
posted on 18th Jun 07 at 20:00 |
quote: To what ecu? | |
bieransri |
posted on 18th Jun 07 at 19:50 |
excellent advise/info, dave will be ringing tomorow:thumbs: | |
Dave A |
posted on 18th Jun 07 at 19:44 |
I have maps for both the 1.4 and 1.6 | |
Robin |
posted on 18th Jun 07 at 19:39 |
That's right, and TBH, I doubt the map for the 1.4 or 1.6 would be much different, I bet SBD only supply one base map, whatever the engine. | |
bieransri |
posted on 18th Jun 07 at 19:37 |
insurance on the 1.6 with mods declared is shocking compared to the 1.4 with mods declared, so for a good 6 months to a year its gotta be the 1.4. plan is to use the 1.6 head so inlet, exhaust etc is right for when the 1.6 gets put in. should just need it remapping for the 1.6 right? or am i way off? | |
Robin |
posted on 18th Jun 07 at 19:36 |
You'll be able to rev to about 7.8k with standard cams TBH, RobHayes did it with his Z16XE. | |
Dave A |
posted on 18th Jun 07 at 19:34 |
use a 1600 block, no reason not to. its a free 20 bhp and 20lb/ft of torque | |
bieransri |
posted on 18th Jun 07 at 19:32 |
:thumbs: that'll do. aslong as it doesnt need to rev too high should be all good yea? | |
Robin |
posted on 18th Jun 07 at 19:31 |
and yeah, it'll be fine as long as it's mapped right. | |
Robin |
posted on 18th Jun 07 at 19:30 |
140bhp | |
bieransri |
posted on 18th Jun 07 at 19:27 |
throttle bodies on standard cams, know i wont see big power gains from the tb's without different cams but cams put me over my budget for now. |