|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Bonnet Release Problem » Post Reply
|
cpcrampton |
posted on 8th Jun 07 at 09:41 |
12vMatt |
posted on 1st Jun 07 at 14:40 |
FIXED!!! | |
12vMatt |
posted on 1st Jun 07 at 14:33 |
the parts are lubricated properly, i knowcos my hands are also lubricated now. | |
CoastalCorsa |
posted on 1st Jun 07 at 14:23 |
try lubricating the moving parts | |
CoastalCorsa |
posted on 1st Jun 07 at 14:22 |
must be something obstructing it or the cable or maybe the pull handle in the footwell | |
12vMatt |
posted on 1st Jun 07 at 14:20 |
im not sure though cos if i push the spring attached to the catch slightly then the catch pops back into place | |
CoastalCorsa |
posted on 1st Jun 07 at 14:08 |
sounds like the spring is either snapped or come off | |
12vMatt |
posted on 1st Jun 07 at 14:04 |
When i open the bonnet it opens fine but when i close it it will not catch unless i pop the catch into the closed position manually, any ideas what might be causing this. |