|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » exhaust port sizes, engine code? » Post Reply
|
andyc1234 |
posted on 3rd May 07 at 20:05 |
i meant exhaust system not ports im on about the manifold fitting the same on either head | |
bieransri |
posted on 3rd May 07 at 20:04 |
cheers robyn great help as usual :thumbs: | |
Robin |
posted on 3rd May 07 at 20:03 |
No, the exhaust ports in the head are different. | |
andyc1234 |
posted on 3rd May 07 at 20:00 |
exhaust for the 1.4 and 1.6 are exactly the same so it doesnt matter which head you put on not sure what a 1.6 head on a 1.4 would do | |
bieransri |
posted on 3rd May 07 at 19:55 |
do the bigger ports have any effect on the power/torque of the engine, or even at all noticeable? | |
Robin |
posted on 3rd May 07 at 19:50 |
Valves are ALL th same IIRC, C16XE has bigger ports, X16XE are slightly smaller, X14XE and X16XEL are smallest, both exhaust and inlet that is. | |
andyc1234 |
posted on 3rd May 07 at 19:48 |
exhaust manifold will fit fine on either its just down to the flow of air inside and the power difference | |
bieransri |
posted on 3rd May 07 at 19:46 |
what about the valve sizes are they different? can the 1.6 head be used on the 1.4? mainly as i want an exhaust made up (manifold back for the 1.6 i plan to install at a later date due to insurance reasons) and want to use it for the 1.4 aswell as the 1.6 | |
Dean_W |
posted on 3rd May 07 at 19:44 |
Nope. They are not. I'm not too sure of the X16 and C16 differences, but the X14 has smaller ports. The X16XEL engine also uses this head. | |
bieransri |
posted on 3rd May 07 at 19:38 |
are the exhaust ports the same on a x16xe, x14xe and a c16xe? |