|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Does tiger seal go in a decorators gun ? » Post Reply
|
corsa120 |
posted on 17th Feb 03 at 17:23 |
at the bottom of the tube where its metal u have cut this piece out as there is bout a 1" space in there, do it like opening a tin of beans with can opener u'll see small plastic thing which u then place the sealent gun on this and push | |
ANDY1.4 |
posted on 17th Feb 03 at 17:10 |
is the a screw thread at one end of the tube? | |
c0r5a_gsi |
posted on 17th Feb 03 at 17:07 |
thanks very much mate :D | |
gareth9584 |
posted on 17th Feb 03 at 17:03 |
there to stop the silicone setting i suppose.watch it though the go every where | |
c0r5a_gsi |
posted on 17th Feb 03 at 16:52 |
ah right, nice one mate. | |
gareth9584 |
posted on 17th Feb 03 at 16:47 |
if u cut the end off lots of little balls will fal out then use it!the steal cap needs 2 be removed | |
c0r5a_gsi |
posted on 17th Feb 03 at 16:37 |
Right I just looked on U-Pols website and they say to use a standard cartridge caulking gun, which is what I have. | |
c0r5a_gsi |
posted on 17th Feb 03 at 15:54 |
Ok I just pierced the top and tried it in a different gun which I know works, but as I thought nothing in the bottom of the can moves, so there is nothing to push the tiger seal out of the can. | |
c0r5a_gsi |
posted on 17th Feb 03 at 14:39 |
doesn't look like anything on the top moves either. | |
StuartGee |
posted on 17th Feb 03 at 14:35 |
Not sure about this, but me and my dad were using some expanding foam recently, and the gun for that was different, and fitted to the top of the can. Could be the same idea here then mate. | |
c0r5a_gsi |
posted on 17th Feb 03 at 14:30 |
c'mon someone must have used it! | |
c0r5a_gsi |
posted on 17th Feb 03 at 13:33 |
Just got some tiger seal and its in a big long metal tube, like bathroom sealant and that sort of thing. |