|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » r1 carbs check list » Post Reply
|
joey736 |
posted on 25th Apr 07 at 18:20 |
quote: good point:thumbs: | |
Vaux Lad |
posted on 25th Apr 07 at 17:40 |
R1 carbs on a 1600 should see around 130bhp. | |
Warren G |
posted on 25th Apr 07 at 17:37 |
just put a 1.4 bottom end on it, or even a 1.6 gte lump | |
Vaux Lad |
posted on 25th Apr 07 at 17:22 |
bogg bro's/\ £170 | |
cor5a_tommy |
posted on 25th Apr 07 at 15:05 |
how would you go about getting the custom manifold made up and what sort of cost does this incur? | |
Jas |
posted on 25th Apr 07 at 11:20 |
sri engine and youd have over 100 bhp :) | |
gsirick |
posted on 25th Apr 07 at 10:24 |
i did a similar setup on a nova 1.4, used 1000cc suzuki bike carbs on a 1.3 ported and gasflowed head. didnt get time 2 finish it so sold them. dont forget u mte need to get the bracket to move the alternator (it mte catch the carbs) | |
joey736 |
posted on 24th Apr 07 at 18:36 |
no idea. | |
neil h |
posted on 24th Apr 07 at 18:32 |
so any ideas what sorta pefromance gains your looking at? | |
joey736 |
posted on 24th Apr 07 at 18:18 |
80 quid for carbs | |
neil h |
posted on 24th Apr 07 at 18:15 |
all that for a 1.2??? fairplay, not many people consider it worthwhile but i've always wanted to outta curiousity over the performance gains. | |
joey736 |
posted on 24th Apr 07 at 17:06 |
went for r1s purely for cash-flow reasons (ie. cheap!lol) | |
Vaux Lad |
posted on 24th Apr 07 at 16:57 |
What size engine is it? | |
joey736 |
posted on 24th Apr 07 at 16:55 |
cheers vaux lad | |
Vaux Lad |
posted on 24th Apr 07 at 16:52 |
Use a nova 1.4sr(14nv) distributor and coil etc. | |
Dave A |
posted on 24th Apr 07 at 16:45 |
just up the road from us at Vsport, will have to bring it in one day when its finished:) | |
joey736 |
posted on 24th Apr 07 at 16:24 |
btw, engine is a small block 8v.cheers | |
joey736 |
posted on 24th Apr 07 at 16:23 |
ive just had word that my carbs and manifold should b ready by the end of the week. just wondering if anyone on here who has done the conversion can tell me if i hav forgotten anything, ok here goes. |