|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » adjustment of camber on rear wheels? » Post Reply
|
Jake |
posted on 11th Apr 07 at 17:40 |
the rear beam on mine was bent for about 9months, had positive camber on the N/S. It werent too bad but i didnt feel comfortable taking corners at any speed | |
csweatherston |
posted on 11th Apr 07 at 17:05 |
quote: try and drive it with positive camber then.........it'll be a laugh to say the least:lol: | |
corsasriboy |
posted on 11th Apr 07 at 16:56 |
just on standard sri suspension at the moment (as far as i know).looks like i'll have to learn the art of shimming then!lol.thanks for all your help! | |
Ben ev |
posted on 10th Apr 07 at 21:06 |
mine was fine with 17's but got wear with 18's. apparently its quite comon. now have a gsi with 15's and again theres no problem. will have to shim it out i think | |
Jake |
posted on 10th Apr 07 at 21:03 |
the rear axle is fixed so no matter what suspension, the camber will always be set at around 1.5degrees. My first corsa and my current corsa both wear on the inner edge first. Corsa C's are they same, they have stupid negative camber at the back. | |
Ben ev |
posted on 10th Apr 07 at 20:56 |
you shouldnt have that with 15's. what sus setup are you using, springs shocks, coilovers etc | |
corsasriboy |
posted on 10th Apr 07 at 20:07 |
thanku all very much for your advice!!i love coming home to find lots of answers to my question! (yeah,i know, i'm sad). its only got 15"'s on,and seems to be the same camber on both sides so i'm ruling out bent axle (wishful thinking lol).i'll have a look for those shims.thanks again peeps!! | |
Jake |
posted on 10th Apr 07 at 18:04 |
As above. have a look on ebay for some EZ shims. You can adjust the toe and camber with these. I still need to fit mine but dont really know what settings i should use | |
rallyjohn |
posted on 10th Apr 07 at 18:02 |
I alter camber on rear of the rally car by loosening stub axle and put shims between stub and rear beam. | |
Ben ev |
posted on 10th Apr 07 at 11:25 |
also if you have 18's it tends to be worse | |
shane2corsa |
posted on 9th Apr 07 at 21:08 |
bent rear beam or incorrect tyre pressure would be my best guess as whats wrong. | |
Ben ev |
posted on 9th Apr 07 at 20:59 |
no because its a fixed beam. i had the same problem, was considering making some kind of tapered spaces behind the hubs (discs on mine) but never got round to it and have since scraped the car | |
corsasriboy |
posted on 9th Apr 07 at 20:45 |
my camber seems to be making the inside of my rear tyres wear out,i'm going to be getting the tracking done but was wondering whether anything can be done to adjust this?any help appreciated!! |