|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Mis-Fire After Engine Rebuild- HEELLLLPPPP!!!! » Post Reply
|
Sly_SRi |
posted on 17th Jan 07 at 19:00 |
check the basics first, make sure you have the right firing order, check your getting a strong spark through to all the plugs. Maybe compression test if you have a tester? | |
bubble |
posted on 17th Jan 07 at 17:55 |
QDM comes up either when knock control circuit is present,or when ecu is fudged | |
Corsa Phil 666 |
posted on 17th Jan 07 at 12:43 |
ttt | |
Corsa Phil 666 |
posted on 17th Jan 07 at 09:29 |
Done the knock sensor and reset the ecu but to no affect. Any other suggestions. Could it be something as simple as HT Leads?? Or would they show up fault codes? | |
Corsa Phil 666 |
posted on 17th Jan 07 at 09:28 |
ttt | |
Corsa Phil 666 |
posted on 16th Jan 07 at 18:29 |
Could it be the knock sensor? While the engine was out i painted the block and i can't remember if i rubbed off the paint before fitting the knock sensor. Could this be my problem?? | |
Dan Lewis |
posted on 16th Jan 07 at 16:45 |
i would get a spare ecu and try that | |
Corsa Phil 666 |
posted on 16th Jan 07 at 16:45 |
Hi Everyone, Just rebuild my x16xe with lots of goddies in & on it. But it's got a mis-fire sometimes on tick over and anything over a 1/4 throttle. |