corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 2.0 conversion difficulty » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Rich_J_Williams

 posted on 5th Jan 07 at 09:17

http://www.vauxhallsportforum.com/phpBB2/20xe-into-a-corsa-t106.html

this is an excellent link on how to do the whole conversion! also a brill site for technical info!


BeArDy

 posted on 5th Jan 07 at 08:35

quote:
Originally posted by Ben ev
easy money. ecu has one multi block and about 6 wires wich go up the drives side of the dash and one to the rear for fuel pump. everythings colour coded the same and diagrams are widely availible. then have a few gearbox side , oil press switch etc. can use corsa loom for starter and alternator so piss easy. think there is also ignition live that end.


:lol::lol::lol::lol:

take it you have never fitted one to a 1lt 12v

Can be done just the wiring side is differant on the 1lt 12v as the engine is a non vauxhall and the ECU is in the engine bay, on the side of the engine.....


Fro

 posted on 5th Jan 07 at 08:22

Think its to do something with the fact its a 12v but not completely sure...


Wonderboy

 posted on 4th Jan 07 at 20:47

Putting a 2 litre engine inplace of a 1l ? Wont that be a huge job ? How much would that cost from a garage ?

I heared it's hard to upgrade 1l engines because of something... which i can't remember :P I have a 1l, it would be nice to upgrade the engine at some point.

Good luck with it.


Ben ev

 posted on 4th Jan 07 at 20:23

easy money. ecu has one multi block and about 6 wires wich go up the drives side of the dash and one to the rear for fuel pump. everythings colour coded the same and diagrams are widely availible. then have a few gearbox side , oil press switch etc. can use corsa loom for starter and alternator so piss easy. think there is also ignition live that end.


Pete B

 posted on 4th Jan 07 at 17:57

Iv put both my engines in my corsa with help for my mate. if you have all of the loom and the ECU and all you have to do is hook up 7 wiers 3 to the starter moter 1 to the ecu (black / yellow) 1 water 1 revs 1fule pump.
if you need any help just u2u me and i,m happy to help


dan_almond

 posted on 4th Jan 07 at 15:37

Heres the story.

Ive currently got a 1.0 12v which im currently turing it into a gsi replica. The plan is to also drop in a c20xe before PVS.

I have a friend who knows his stuff, but mainly with 205's. Hes had 3 or so engine in his car, so i know he is capable.

Im only worried about the wiring of the redtop in to corsa, as it would be completely different to his as he's running his on carbs, and not an injector system.

How easy is it to connect the wiring, as i want a reliable engine.

Please help ?