|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » clutch on x14xe » Post Reply
|
mattievRS |
posted on 17th Oct 06 at 15:32 |
going to do the whole lot mate.Thought uprated clutch maybe a racing clutch,friction plate,thrust bearings and release bearings.:D | |
Warren G |
posted on 17th Oct 06 at 06:30 |
will have a flat flywheel, the x16xe has a pot fly wheel, if its whineing make sure you replace the release bearing (i have one if you need one) | |
ckallis500 |
posted on 16th Oct 06 at 21:50 |
yes my old m-reg sri 16v had a flat flywheel and inspection cover... every corsa i have seen that has been a bit newer has had a gearbox fitted which did not have the inspection cover... | |
davey_jack |
posted on 16th Oct 06 at 21:33 |
funnily enough I have an x14xe on an M reg SRi and it doesnt have a pot flywheel, one glance underneath the car with the inspection plate off will tell u mate | |
ckallis500 |
posted on 15th Oct 06 at 18:44 |
on that age car it should have the pot type flywheel and no inspection plate on the bottom of the gearbox, so i'd say an unlikely chance u will be able to do it without dropping the box... go check under the front of the car and you will see on the underside of the gearbox if it has an inspection plate or not, if it does then unbolt the 4 11mm bolts and see if it has a flat flywheel... i doubt it on that age car tho... worth a look. chris | |
mattievRS |
posted on 15th Oct 06 at 18:28 |
quote: I hope so!Anyone else????? Cheers mate!:thumbs: | |
corsacalvin |
posted on 15th Oct 06 at 18:26 |
heard u can change it w/o takin out the gearbox | |
mattievRS |
posted on 15th Oct 06 at 18:13 |
already got haynes but wondered if the x14xe engine has enough clearance between the flywheel and the clutch bell housing cover plate to work out if it has a pot clutch which is thicker or a standard clutch which is thinner.I dont need to be dropping the gaerbox out if i can help it.Any help would be great!:thumbs: | |
paulc |
posted on 15th Oct 06 at 16:28 |
im getting the haynes manual soon , will let youknow mate | |
mattievRS |
posted on 15th Oct 06 at 11:07 |
ttt | |
mattievRS |
posted on 14th Oct 06 at 20:11 |
Gotta change clutch in next few weeks as mine is whirring:! Ive got a 1.4 16v sport on a p plate.Is it gonna be a bitch to do????:o |