|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » erg valve fault code.... » Post Reply
|
Warren G |
posted on 3rd Oct 06 at 16:32 |
theres a hole on the throttlebody plate (must be from the EGR valve), so you blank that off? what happens if you leave it to vent to the atmosphere? | |
csweatherston |
posted on 3rd Oct 06 at 12:33 |
so..on the x16xe...do i actually need the small blanking plate there too?? | |
Dave A |
posted on 3rd Oct 06 at 07:49 |
the egr is blanked off on the inlet manifold as the old egr feed is underneath the throttle body which isnt there anymore. | |
csweatherston |
posted on 2nd Oct 06 at 23:00 |
erm...dunno | |
Warren G |
posted on 2nd Oct 06 at 17:13 |
why do you need to blank off the egr? why can't you just leave the egr valve on? unless if increases bhp | |
csweatherston |
posted on 2nd Oct 06 at 16:53 |
the big blanking plate on the side of the lower manifold??.......hmm, i attached the vaccume thingy to that and an earth...... | |
Dean_W |
posted on 2nd Oct 06 at 10:44 |
I have the feed to the Mantzel box from the EGR takeoff on mine. It has been there since it was fitted. | |
Dave A |
posted on 2nd Oct 06 at 10:37 |
it will come on and off all the time, its a common problem with mantzels. get the code read properly its likely to be the egr. if so you need to take a feed from the egr blanking plate where the tb used to sit and plumb it into the mantzel box. | |
csweatherston |
posted on 1st Oct 06 at 23:30 |
dave the problems back :(....any further ideas?? | |
csweatherston |
posted on 1st Oct 06 at 15:06 |
quote: firstly i tanked my car with fuel...the commenced driving from plymouth to torquay...roughly 70mile..... stopped...turned my engine off, ate a burger...started driving home and the light didnt come back on :D | |
Dave A |
posted on 1st Oct 06 at 08:41 |
quote: told you so;) | |
timmee |
posted on 30th Sep 06 at 19:39 |
how did you sort it then cos mine is doing the same ? please help | |
csweatherston |
posted on 30th Sep 06 at 17:11 |
wooohoo...dave it worked!!! thanks mate :D.....love u long time | |
csweatherston |
posted on 30th Sep 06 at 15:05 |
ok...im going to get some petrol then go for a big big drive....if it doesnt work, ill be angry :mad: lol | |
Dave A |
posted on 30th Sep 06 at 15:04 |
:o:lol::thumbs: | |
csweatherston |
posted on 30th Sep 06 at 15:03 |
u didnt tell me what to do.......you said just drive it dave lol | |
Dave A |
posted on 30th Sep 06 at 15:02 |
not being funny, but you u2u'd me about this and I told you what to do. then you post it up anyway? :lol: | |
csweatherston |
posted on 30th Sep 06 at 15:00 |
ive blanked the egr valve off (x16xe) how do i stop the eml light coming on??...someone briefly mentioned to me i need to 'de-activate' it from the ecu..... |