|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » arp conrod bolts » Post Reply
|
Dave A |
posted on 18th Aug 06 at 09:45 |
mine came labeled for a 1.4/1.6 8v. I rang sbd and they told me they were the same for the 16v. | |
James R |
posted on 18th Aug 06 at 07:23 |
The 8v and 16v ones are different as far as I was aware, ARP list a set for the 1.3 8v and a set fo the 16v engines, looking at the conrods they are different fitment. | |
Siberia |
posted on 17th Aug 06 at 19:33 |
ive a set of these in the cubboard somwere... along with all the other bits of 1.6 16v i've clooected and never used:lol: | |
broster |
posted on 17th Aug 06 at 18:49 |
what rev limit you got, i had 7200rpm on standard rod bolts and never had a problem | |
Dave A |
posted on 17th Aug 06 at 16:12 |
quote:# correctomundo | |
srs1 |
posted on 17th Aug 06 at 10:12 |
i just thought they had to be percifically for the 16v ones and was not sure if the xe ones were too wide or something. | |
fragpot |
posted on 17th Aug 06 at 09:38 |
I thought the 8V and 16V ones were the same? | |
RobHayes |
posted on 17th Aug 06 at 08:30 |
i think mine were for an 8v | |
CorsaGSI_DK |
posted on 16th Aug 06 at 23:33 |
What about here --> http://www.mathijssentechnics.nl/main.php?View=page&part_id=301307&hid=1&lhid=1&lvid=7 | |
Stu_22 |
posted on 16th Aug 06 at 23:30 |
or just got to rallydesign | |
Stu_22 |
posted on 16th Aug 06 at 23:29 |
8v | |
srs1 |
posted on 16th Aug 06 at 21:43 |
i have looked all over the place on the arp site for these for a 1600 16v engine with no luck. |