|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » XE Clocks questions » Post Reply
|
ed |
posted on 21st May 06 at 18:27 |
Oh hang on, you could use Tigra dials which take a reading from an ABS sensor if you wanted to. | |
ed |
posted on 21st May 06 at 18:27 |
But there are only a few options here. All of which have been covered. | |
ainsley_brader |
posted on 21st May 06 at 18:23 |
perhaps hes after other peoples opinions too! | |
ed |
posted on 21st May 06 at 18:09 |
He's told you the answer. Use a digidash transducer. | |
Greg_M |
posted on 21st May 06 at 17:21 |
ttt anyone any advice | |
Greg_M |
posted on 20th May 06 at 20:13 |
WHAT :boggle: | |
RobHayes |
posted on 20th May 06 at 18:27 |
you can use a digidash transducer, which has a gear similar to a speedo cable, but then a box on the top which translates the rotations into a speed :) | |
Greg_M |
posted on 20th May 06 at 18:26 |
same as installing a digidash | |
X 60RSA |
posted on 20th May 06 at 18:25 |
quote: You can! | |
Greg_M |
posted on 20th May 06 at 18:24 |
i thought you could change the transducer or whatever it called. | |
X 60RSA |
posted on 20th May 06 at 18:19 |
Speak to Dan on here, i'm sure he kept his eleccy clocks? | |
ed |
posted on 20th May 06 at 18:15 |
You need some mechanical clocks, or the old style electronic clocks. The new style clocks will not work with the older style gearboxes as they read the speed in a different way. | |
Greg_M |
posted on 20th May 06 at 18:06 |
are the cable driven clocks? | |
RobHayes |
posted on 20th May 06 at 18:05 |
x12xe, no problems | |
Greg_M |
posted on 20th May 06 at 17:56 |
yeah i have rev counter. that would be good if i could aquire them;) | |
RobHayes |
posted on 20th May 06 at 17:54 |
IF i remember right, 12v clocks wont work properly, RPM will overread. BUT your in luck, provided you have rev counter clocks, i have a set in the garage (4cylinder engine ones) which have no plastic front cover (but you could swap your one onto it) | |
Greg_M |
posted on 20th May 06 at 17:53 |
I have eletronic clocks, XE is cable how will this work:lol: |