oooops "caps lock" off:lol:
i wasnt shouting........honest!!

Calm down mate! :|

IF ITS THE LOW PRESSURE PIPE THEN YES "KNOCK UP SOME NEW ONES" IF ITS THE HIGH PRESSURE PIPE,UNLESS YOU CAN MAKE IT WITHSTAND ABOUT 1000 PSI ON LOCK THEN DONT"KNOCK ANYTHING UP" GO TO PIRTEK
THEY MAKE HIGH PRESSURE HOSAES
QUESTION; IS THE PIPE PUSHED ON TO THE PUMP OR SCREWED IN(THIS WILL DETERMINE HIGH OR LOW PRESSURE
DONT DRIVE THE CAR WITH A DRY PUMP (ITS LIKE DRIVING THE CAR WITH NO OIL)

You should be able to knock up some new ones using brass and rubber piping. I had to bend mine out the way of my new manifold recently, however the rubber piping might melt.



[Edited on 02-05-2006 by FozzyGSI]

cheers mate yeh at the mo jst running it without the belt on so no pas. il check out those companys m8 thanx

boyracer2002 was breaking a gsi.
not sure if it had pas or even if it's still with him, but worth a u2u.

i know they are silly expensive from vaux, but a local hose fabricator should be able to knock up a replacement end using the good half you already have.

try pirtek. i have a great place near me called spectrum hose, but i don't thin they are national.

hi, i have got a 2litre corsa gsi and the top power steering pipe has burst at the pump union. does anybody have or know anyone who has one of these knocking arround or where to source one from
cheers mike