Thanks, but what I ment to say was where does the wires go from the clock as mine do not connect to anything. I know its not the actual clock as I got another second hand one and fitted it in and that still did not work.




So i'm wondering if you know where they should end up, thanks again.

here is the info on the plug on the back of the clock

http://www.carluccio.de/index.php?page=pro-tid (its in german but you can figure it out)

i have got the info on the iso plug just got to find it !!

edit had a look but couldnt find it but.......




you can cross refrence the details from the link and use the pic above to give you the pinouts/colours

If your into electronics this may intrest you ...... http://www.rolandgruber.de/opel_tid/OpelTID_e.htm

[Edited on 24-04-2006 by flash22]

[Edited on 24-04-2006 by flash22]

I have a 'N' reg corsa and the clock doesn't work. When I got the car all the wiring was in a right mess as some one had bodged it up by putting a sub and amp in it. They have seemed to cut the wires for the clock and I cant see where they are supposed to meet up, so I was wondering if any one had like a wiring diagram of could help me?
Cheers