|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Where is my ICV * pic * ... » Post Reply
|
Rob B |
posted on 1st Jan 06 at 20:39 |
Hmm ok, so ill try a new ICV could this be causeing the eml to come on when i drive it etc.. | |
Siberia |
posted on 1st Jan 06 at 20:24 |
feck what did i do to that post:lol: | |
Rob B |
posted on 1st Jan 06 at 20:20 |
well its like when i come to stand still sometimes the rev's wont drop they will stay at 2k,... and then when i rev it they drop down to 800 then sometimes when i come to a stand still it will drop right down to 200 rpm then go back upto 800... | |
Siberia |
posted on 1st Jan 06 at 20:16 |
its down there.... | |
flash22 |
posted on 1st Jan 06 at 11:32 |
the last pic i posted is of the tb your tb is on the end of the dbilas and number 4 is the idle control governor arrowed | |
Rob B |
posted on 1st Jan 06 at 11:19 |
can anyone post up the TIS thingy on how to replace, do you have to take off all that metal bit inbetween the dblias and where the airbox would go ? Please say you dont cause one of the bolts has been rounded off :( | |
Ryan_G1 |
posted on 31st Dec 05 at 19:13 |
Thats theone. Its a Stepper motor | |
flash22 |
posted on 31st Dec 05 at 19:08 |
number 4 arrowed is the idle control governor what is in the TB | |
Ryan_G1 |
posted on 31st Dec 05 at 18:49 |
it is just below the fuel line in the second pic | |
Ryan_G1 |
posted on 31st Dec 05 at 18:48 |
Its called a stepper motor | |
flash22 |
posted on 31st Dec 05 at 18:48 |
in the vx tis 1. is the idle control stepper motor it showes it in place on top of the fuel pressure reg in pic 2 i am cofused now | |
Rob B |
posted on 31st Dec 05 at 18:40 |
in the second pic is that the switchover valve ? | |
flash22 |
posted on 31st Dec 05 at 18:33 |
this is a pic of what vaux call the idle control stepper | |
pllusy |
posted on 31st Dec 05 at 18:29 |
off topic but could i get a manifold like yours to fit my car its a 1.8 sri c? how much are they and how much hassle/parts are needed to fit it? also wot kinda power gains would i be likly to see? | |
Rob B |
posted on 31st Dec 05 at 18:28 |
Ok cool.... the only thing making me think its the ICV is the guy that had the engine before said it had this fault intermitent ... | |
Robin |
posted on 31st Dec 05 at 18:28 |
its a black thing on the big silver block behind the blue plug in that pic rob | |
flash22 |
posted on 31st Dec 05 at 18:25 |
just had a look in the tis and it list a idle stepper motor whats stand alone and idle governor whats in the tb | |
Rob B |
posted on 31st Dec 05 at 18:24 |
Hmm i have never heard of that but i get wherre abouts you mean now:) | |
pllusy |
posted on 31st Dec 05 at 18:21 |
the tb butterfly is in the throtttle body its the bit thar flaps open and closed to let air in. if you look at your pic the tb is the metal bit between the manifold and the pipe that connects to the air filter. | |
Rob B |
posted on 31st Dec 05 at 18:15 |
yeah thats why im having trouble finding it ,,.. because its all moved :| | |
flash22 |
posted on 31st Dec 05 at 18:07 |
the icv is on the side of the throttle body ?? but i am not too sure on the dbilas setup | |
Rob B |
posted on 31st Dec 05 at 17:55 |
thats not the egr thats the secondry air pump... and i dont have a clue where the ICV or TB butterfly i know nothing about engines :) | |
pllusy |
posted on 31st Dec 05 at 17:45 |
might be totally wrong here but is the idle control valve not on the throttle body? | |
Rob B |
posted on 31st Dec 05 at 17:30 |
where is my ICV located, i think this may be the reason for my eml coming on as sometimes it holds revs at 2k then drops when you rev it and others it will nearly stall... |