|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Magnex fitting help » Post Reply
|
chr15barn3s |
posted on 29th Dec 05 at 18:02 |
I used a sleeve in the end but had to cut some of the pipe away. After all that I think it is the wrong backbox anyway as it seemed to be to long once fitted to the car. Ive cut it so I cant take it back now can I :( Now it rattles a bit when I pull away so I need to work out where that is coming from and move it slightly | |
Gregor |
posted on 29th Dec 05 at 15:16 |
I never had to bend mine. Wouldnt be a good fit if you did that ? | |
mwg |
posted on 29th Dec 05 at 14:50 |
would imagine you bend them a bit to make it fit | |
chr15barn3s |
posted on 29th Dec 05 at 14:42 |
Are you meant to bend the slits over the centre section? | |
chr15barn3s |
posted on 29th Dec 05 at 14:39 |
The slits are there but I cant get them over the centre section as the diameters are exactly the same | |
Will_Sport |
posted on 29th Dec 05 at 14:35 |
it should have some slits cut into it that you slip over the centre section. doesnt look like someone has cut that bit off does it? if so you need a sleeve of some variety | |
chr15barn3s |
posted on 29th Dec 05 at 14:24 |
Ive just bought a magnex backbox but im having trouble fitting it. I cant get the back box pipe over or into the centre section as both pipes are the same size. I dont really want to bend it so is there anyway to get it on? Could I use an exhaust sleeve or something? |