|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » New EGR fitted, EML still on....ECU need clearing ? » Post Reply
|
Dave A |
posted on 17th Dec 05 at 19:20 |
em light wont come on unless there is a current fault. a stored fault will not make the light come on. neither would having the egr blanked off. | |
Rob B |
posted on 17th Dec 05 at 16:13 |
well i cant see how else its gonna get cleared :| :( | |
RobHayes |
posted on 17th Dec 05 at 16:05 |
well if you want to be awkward get a 1.6 diag plug out scrappy, wire it in, then take it to vaux and get cleared :| :| :| | |
Rob B |
posted on 17th Dec 05 at 16:04 |
bit hard Rob, 1.2 diog is different to the 1.6 diog plug :| | |
RobHayes |
posted on 17th Dec 05 at 16:03 |
take it to vaux and get it cleared | |
bubble |
posted on 17th Dec 05 at 16:02 |
quote: it aint readin egr valve is it cuz of sticky valves?? we have a few at work last week from around the stone area-fuel from the shell over that way was contaminated and dirty, masses of crap on the valve stems. | |
Rob B |
posted on 17th Dec 05 at 15:46 |
Done that ... | |
CoastalCorsa |
posted on 17th Dec 05 at 15:44 |
dis connect battery for half an hour this usually clears ecu | |
Rob B |
posted on 17th Dec 05 at 15:38 |
Right basically eml was on and saying EGR fcuked, tryed blanking it off no joy, so i bought a new one, eml is STILL coming on even after new one has been fitted ? does the ECU need clearing by tech2, im also using a blanking plate so may it try it without that aswell... |