|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Change your cam pulleys » Post Reply
|
Adam_B |
posted on 7th Oct 05 at 23:25 |
quote: and there usually a fair bit lighter than the normal ones | |
axel156 |
posted on 7th Oct 05 at 13:37 |
I use my car for 1/4 mile sprints, and when i change from gear (2,3 and 4) the rev don't became under the 5000rpm. So i want de most torque and Ps between de 5000rpm and the 7200rpm. | |
broster |
posted on 7th Oct 05 at 13:28 |
why would you want to do that? and youd need to change the cams to alter that.... change the power delivery, but low down torque is better.... | |
axel156 |
posted on 7th Oct 05 at 13:25 |
What i exactly want is to move torque line with 1000rpm is this possible? Now i have 172nm at 4000rpms and i want that i have it at 5000rpm | |
ed |
posted on 7th Oct 05 at 13:00 |
quote:Some people use them for perfectly aligning the cams at TCD as with standard pullys the cams are often a tiny bit off. But they are really meant for advancing or retarding your timing.... | |
ed |
posted on 7th Oct 05 at 12:57 |
Oh right, not familiar with 1.6's :| | |
broster |
posted on 7th Oct 05 at 12:55 |
you cant just fit them tho ed, the standard ones have a pic up for the cam position sensor! the engine runs shite without it | |
Siberia |
posted on 7th Oct 05 at 12:52 |
quote: and the point of fitting verniers is?:o | |
Siberia |
posted on 7th Oct 05 at 12:51 |
omex omex omex :o | |
ed |
posted on 7th Oct 05 at 12:51 |
You can just fit them, you don't need a stand alone ECU, you need a stand alone ECU if you want to advance or retard your timing ;) | |
broster |
posted on 7th Oct 05 at 12:48 |
quote: yes its like dta. | |
broster |
posted on 7th Oct 05 at 12:47 |
quote: you sound like a woman | |
axel156 |
posted on 7th Oct 05 at 12:47 |
Is an standalone system kind of dta???? | |
Siberia |
posted on 7th Oct 05 at 12:33 |
cars huh? who'd have em :lol: | |
broster |
posted on 7th Oct 05 at 12:30 |
ws a waste for me too, then i went and bought more! lol | |
Siberia |
posted on 7th Oct 05 at 12:28 |
no... yet another waste of money by me...:| | |
broster |
posted on 7th Oct 05 at 12:26 |
siberia, will that eer get fitted to a car | |
Siberia |
posted on 7th Oct 05 at 12:14 |
you will need a standalone... ecu... funny i know were theres one for sale:o | |
axel156 |
posted on 7th Oct 05 at 12:12 |
Yes changeable cam pulleys!!!:) | |
broster |
posted on 7th Oct 05 at 12:11 |
when you say change do you mean fit vernier pullies, like these... | |
axel156 |
posted on 7th Oct 05 at 11:57 |
When you change your cam pulleys, do you must change your chip? |