|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » corsa 16v clutches » Post Reply
|
Rileysport |
posted on 14th Sep 05 at 14:26 |
So X16 full clutch should go on an X14 flywheel :thumbs: | |
James R |
posted on 14th Sep 05 at 14:14 |
Some of the 16XE's have a different flywheel (pot type) and hence a difference perssure plate, the friction plate is the same I believe. | |
Cybermonkey |
posted on 14th Sep 05 at 13:58 |
quote: | |
Siberia |
posted on 14th Sep 05 at 13:54 |
um... you ring up the motor factors and i bet they will ask you for your engine number... apparently the gsi one was changed half way through 1994.... mines a 200mm one though... | |
Rileysport |
posted on 14th Sep 05 at 12:48 |
good good, my wacky experiment continues :lol: | |
Cybermonkey |
posted on 14th Sep 05 at 12:43 |
yes 200mm for all the DOHC engines, not sure about the 1.2 though. all SOHC are 190mm | |
Rileysport |
posted on 14th Sep 05 at 12:34 |
are all c16xe, x16xe and x14xe clutches 200mm diameter ?????? |