|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Fitting of 16" alloys to a Corsa » Post Reply
|
craig8 |
posted on 27th Aug 05 at 18:18 |
my 15" alloys are et49 and im lowered 60mm and mines still rubs with someone in the back | |
purpleperil |
posted on 27th Aug 05 at 09:06 |
The 1.2's come in 16inch at an offset of 45. | |
Dave A |
posted on 26th Aug 05 at 22:33 |
can you get pro race alloys in 16's with a 45mm offset? | |
marklawton |
posted on 26th Aug 05 at 18:01 |
ive got 16s on mine and the et is 45 lowered 60mm, i get scrubbage on the front only going over speed bumps, the rear only rubs if i have two people on the back, its fine with one person in the back, all iam going to do is cut all the bolts and screws off the arches which will solve the problem | |
Twiggy |
posted on 26th Aug 05 at 17:59 |
i wud think a quick trim wud be in order!:thumbs: | |
purpleperil |
posted on 26th Aug 05 at 17:52 |
I'm sure this question has been asked a load of times |