corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » loom plugs for sensors » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

GHurn

 posted on 19th Aug 05 at 21:07

but i dont know if it has the capacity to cope with the 2.0 map etc would it run if so wot like? might run fine or could run like a bag of sh't


GHurn

 posted on 19th Aug 05 at 21:02

it could be done i you could get the plugs off the 20xe loom, replace and solder the ones that are different to the 16xe loom they use the same number of wires for each sensor i think just different plugs


RobHayes

 posted on 19th Aug 05 at 20:10

so an MBE ecu + loom for a 16v corsa (16xe) would not be compatible with a 20xe?


James R

 posted on 19th Aug 05 at 20:08

yes
no
no
no
yes
yes



RobHayes

 posted on 19th Aug 05 at 19:38

does anyone know if the actual plugs that the wiring connects to, are the same for a c16xe and c20xe

coolant temp sensor
inlet air temp sensor
throttle pot
coil pack
injectors
crank sensor