corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » LOWERING- NEED HELP URGENTLY! » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Lisa

posted on 16th Aug 05 at 21:38

you have to cut the bumpstops down .


Scott F

posted on 16th Aug 05 at 21:18

quote:
Originally posted by ShEp
hmm, i had a problem like this when i 60/40'd my car, check underneath the car when its on the ramps, its probably not bottoming out, it'll be hitting the beams on the ramp :thumbs: its silly but it happened to me and i shit myself for a second


sorry when i said bottoming out i meant that it was hitting the bumpstops


purpleperil

posted on 16th Aug 05 at 19:48

Make sure you have both spring fitted on the front set up. As I understand it, coilovers have a small and a large spring fitted ontop


ShEp

posted on 16th Aug 05 at 19:23

hmm, i had a problem like this when i 60/40'd my car, check underneath the car when its on the ramps, its probably not bottoming out, it'll be hitting the beams on the ramp :thumbs: its silly but it happened to me and i shit myself for a second


Black Stallion SRi

posted on 16th Aug 05 at 17:15

dont know out about suspension but is it possible he put the fronts on the back and back on the front?

dont even know if you can do that lol just guessin


Scott F

posted on 16th Aug 05 at 17:02

currently, my car is up on ramps at a garage with the mechanics scratching their heads! hopefully someone can tell me what is wrong!

they have fitted an fk suspension kit to my car (60/40 drop) and the back is fine but the front you can make bottom out by pulling the car down with your bare hands! i was talking to the lad who did it and apparently he has transferred the bump stops etc over from the original set up and says the springs seem too soft! has n e one got any suggestions or had this happen to them before?