|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Simple question: Idle Speed Control Valve or Motor? » Post Reply
|
RichR |
posted on 13th Jul 05 at 14:24 |
orange can, black writing - I didnt throw my man-goo at it - It is a product I promise! | |
Cybermonkey |
posted on 13th Jul 05 at 02:09 |
no Gunk is a degreaser you can buy from Halfords or somehwere similar :) | |
Carso |
posted on 13th Jul 05 at 01:56 |
"covered it in gunk" | |
RichR |
posted on 13th Jul 05 at 01:53 |
I didnt replace the O ring when I did mine over two years ago - covered it in gunk, cleaned it then lubed it - not had an issue since - it runs perfectly now and has ever since | |
Carso |
posted on 13th Jul 05 at 01:41 |
so I dont even have to remove it?? | |
Cybermonkey |
posted on 13th Jul 05 at 01:17 |
just spray a shit load of carb cleaner over it. | |
Carso |
posted on 12th Jul 05 at 23:51 |
ok.. cool... | |
Cybermonkey |
posted on 12th Jul 05 at 23:46 |
yeah same thing Carso, you might be able to clean it up with carb cleaner, because its under the inlet manifold. | |
Carso |
posted on 12th Jul 05 at 23:35 |
its a 1.4 8v | |
Dave A |
posted on 12th Jul 05 at 23:30 |
| |
Carso |
posted on 12th Jul 05 at 21:29 |
My car has been having problems.. so I check the ecu code - 35 which says its the idle speed control.. |