need the front drivers side mount for a 1.4 or 1.6 16v engine.
wiring is the difficult bit, when i did mine i used aftermarket management and loom so was nice and easy :)

What sort of price did ur mate pay for the engine? all i need is to try and find a 1.4 16v engine get a mount that will hold it and a transmission and im gettin it fitted for me £150 labour. the hard bit is trying to find one thats in good condition at a good price.

Anyone any ideas where to get a hold of one?

easy conversion. did this conversion on a mates car recently, only tricky bit is the wiring as the 1.0 12v ecu is on the side of the engine rather than in the footwell, so you need to make a new loom for the dash and other bits.

better off getting a 1.4 16v corsa tbh.

cheers stu

so the engine mount for the 1.2 16V is the same as the 1.4 16V?
because i was going to try and get the corsa c 1.4 engine but the mount would be too wide for the b. wondered if the 1.2 corsa b mount could be used to hold it?

dav

I dont know much about the 12v so I guess get a 1.4 16 engine and box about £400

Again i'd guess yous need different mounts as your engine is smaller but you can get these from any other model corsa eg 1.2 8v

[Edited on 07-07-2005 by Stu_22]

My 1.0 12V engine is needing replacing.
I was thinking of getting a 1.4 16V.
Are they hard to find?
Whats the sort of price for a low milage engine?
will also need engine mount and transmission

Cheers Dav