|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » c + x 16xe visual difference » Post Reply
|
Will94 |
posted on 3rd Jul 05 at 10:37 |
hehe i remember seeing that for sale on ebay! was gonna put in a bid but its too far away from me :( | |
Cybermonkey |
posted on 1st Jul 05 at 12:44 |
i think inlet cover is ceramic | |
Ojc |
posted on 1st Jul 05 at 11:00 |
Thats X16XE, it has the secondary airpump on the exhaust manifold and the metal inlet manifold. | |
Nic Barnes |
posted on 30th Jun 05 at 17:33 |
yeah, you can get all bits from motor factors. id do the cam belt as well, even if someone says its been done, if you do it then you know its alright. | |
CoastalCorsa |
posted on 30th Jun 05 at 17:29 |
most motor factors should sell gasket sets and decent head bolts for these engines | |
Nic Barnes |
posted on 30th Jun 05 at 17:26 |
dunno couple hundred quid for all gaskets and bearings and belts and tensioners. depends if you putting new pistons in it or not. just the 2 gasket sets if thats all you doing shouldnt be much more than 70 quid from a motor factors. if you take head off, use new head bolts though | |
CoastalCorsa |
posted on 30th Jun 05 at 17:23 |
Thanx very much ppl how much should it be for it stripped down an reconditioned | |
5chaap2k |
posted on 30th Jun 05 at 17:21 |
x16xe all the way! | |
Nic Barnes |
posted on 30th Jun 05 at 17:20 |
looks like an x16xe to me. my c16xe has a black plastic inlet manifold and doesnt have that deeley on the exhaust manifold either | |
CoastalCorsa |
posted on 30th Jun 05 at 17:19 |
Here is a pic of the engine | |
Nic Barnes |
posted on 30th Jun 05 at 17:18 |
ah, yeah forgot about the inlet manfolds, top tip 5chaap2k | |
5chaap2k |
posted on 30th Jun 05 at 17:17 |
c16xe has an plastic intake x16xe have a iron intake | |
CoastalCorsa |
posted on 30th Jun 05 at 17:16 |
Cheers buddy this particular engine has been removed from the car it has no plastic cover so i will have to ask the owner to check the engine number | |
Nic Barnes |
posted on 30th Jun 05 at 17:10 |
air flow meter on the c16xe is on the driverside of the engine just before the air box. on the other its underneath the throttle body i belive. the c16xe says vauxhall on spark plug cover, other says ecotec. aprt from that, dunno visually. | |
CoastalCorsa |
posted on 30th Jun 05 at 17:06 |
Is there any visual difference could any one post pictures |