|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » sandwich plate replacement on c20xe, what part do i need to order? » Post Reply
|
Graeme |
posted on 12th Apr 05 at 22:52 |
at first mine will just be for pod then will maybe tracks then road legal! | |
Mistamist |
posted on 12th Apr 05 at 22:43 |
oil cooler is not really necessary, unless you plan to do a lot of track days or thrash the tits off the car everywhere. | |
Graeme |
posted on 12th Apr 05 at 22:34 |
so u dont actually need an oil cooler for the engine, i was gona buy one but have herd summit bout u dont need it!! | |
Steve Smith |
posted on 12th Apr 05 at 22:13 |
90144360 is the part number | |
thunda |
posted on 12th Apr 05 at 13:55 |
thats the answer i was looking for, thanks J | |
James R |
posted on 12th Apr 05 at 13:38 |
You want to order the small 1" long double threaded pipe from any 1.2/1.4/1.6 8v engine that the filter screws on to, it's about 2.50-3 pounds | |
Adam_B |
posted on 12th Apr 05 at 11:30 |
if the engine has had an oil cooler and your not using it just remove the sandwich plate from above the oil filter. If you want one on then you'll need the plate as well as hoses and the cooler itself | |
thunda |
posted on 12th Apr 05 at 11:01 |
thats the one adam | |
Adam_B |
posted on 12th Apr 05 at 10:03 |
do tou mean on the oil filter/cooler? | |
thunda |
posted on 12th Apr 05 at 09:11 |
done the xe conversion, anyone know the part number of the thing i need, its a blanking plug right? or am i just wrong |