|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » IVC bolts - allen or torx? » Post Reply
|
RKS |
posted on 5th Mar 05 at 12:43 |
i just cleaned my ICV alltho some clown had previously rounded off the one bolt, what a nitemare!!! | |
Joff |
posted on 5th Mar 05 at 11:50 |
:cool: | |
russb |
posted on 4th Mar 05 at 22:33 |
its a T20!! the only f'in torx peice i never had i got about 4 of everything else!!! so i took the whole throttle body off :s and i also took the EGR valve off at the same time and all the injecters gonna go into work tomorrow and hijack the ultrasonic bath and clean my injectors out, and make some carbon cleaner and clean everything else...also tempted to block off the EGR valve!!! | |
Rileysport |
posted on 4th Mar 05 at 08:47 |
or use a standard size cutting disc... works every time :lol: | |
Joff |
posted on 4th Mar 05 at 08:40 |
It's a lucky dip :lol: | |
Joff |
posted on 4th Mar 05 at 08:39 |
Remember, the two screws aren't spaced the same distance from the centre of the ICV. | |
Rileysport |
posted on 4th Mar 05 at 08:39 |
T25 :P | |
Joff |
posted on 4th Mar 05 at 08:37 |
T20 | |
Dave A |
posted on 3rd Mar 05 at 23:38 |
yep, torx fitting. not sure wot size tho:boggle: | |
Adam-D |
posted on 3rd Mar 05 at 22:48 |
torx i think | |
russb |
posted on 3rd Mar 05 at 22:27 |
are the bolts holding the ICV in place allan keys or torx? and what size? i cant get em off :( nothing will fit in!!! |