|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Lowering 60mm » Post Reply
|
Col004 |
posted on 10th Nov 04 at 18:44 |
Alright lads, there 16" Matrix Torque. Got them from WheelBase. I was after Speedline's but the Matrix were one of very few wheels to choose from in 16's that would clear my brakes :) | |
Beardo |
posted on 10th Nov 04 at 13:02 |
are they bk racing wheels?? | |
j0hn |
posted on 10th Nov 04 at 08:54 |
y we up sooo early? | |
Beardo |
posted on 10th Nov 04 at 08:50 |
wat wheels are them mate?? | |
j0hn |
posted on 10th Nov 04 at 08:47 |
phat! | |
Col004 |
posted on 9th Nov 04 at 22:08 |
Alright mate..... Mines lowered 60mm all round on Koni's with a et 42 off-set 16" wheel. It sits up a little at the back due to it being stripped out, but it does'nt scrub at all no matter how hard its pushed on the front or rear:thumbs: | |
Rileysport |
posted on 9th Nov 04 at 14:36 |
i'm down 60 on 15's and i got no probs... even with an engine in the boot :thumbs: | |
Beardo |
posted on 9th Nov 04 at 14:34 |
corsa junkee > what offset are your wheels? | |
MJ |
posted on 9th Nov 04 at 12:59 |
yer true there is nout wrong with a 5 door, its the same size as a 3 door | |
Go3asy |
posted on 9th Nov 04 at 12:01 |
nothing wrong with 5drs! | |
j0hn |
posted on 9th Nov 04 at 11:37 |
cough.. 5 door .. cough | |
Lee 16v |
posted on 9th Nov 04 at 11:35 |
im on 205/40 17's with a 60mm drop, no scrubbing | |
TOMAS |
posted on 8th Nov 04 at 12:29 |
Im on coilovers but have been down 70mm on 16 x 7's et45 with 195/40 rubber. All I have done is remove the top arch bolts front and rear and slightly trimmed the black plasic rear arch and also the rear metal arch and I never had scrubs. piccie... | |
Tom_1.216v |
posted on 8th Nov 04 at 11:28 |
try the seach engine mate just put in somin like "16's -60mm" | |
Beardo |
posted on 8th Nov 04 at 10:34 |
hi, |