Alright lads, there 16" Matrix Torque. Got them from WheelBase. I was after Speedline's but the Matrix were one of very few wheels to choose from in 16's that would clear my brakes :)

are they bk racing wheels??

y we up sooo early?

wat wheels are them mate??

phat!

Alright mate..... Mines lowered 60mm all round on Koni's with a et 42 off-set 16" wheel. It sits up a little at the back due to it being stripped out, but it does'nt scrub at all no matter how hard its pushed on the front or rear:thumbs:

i'm down 60 on 15's and i got no probs... even with an engine in the boot :thumbs:

corsa junkee > what offset are your wheels?

yer true there is nout wrong with a 5 door, its the same size as a 3 door

nothing wrong with 5drs!

heres mine -80 at the back with 17s ET 45, rubs with ppl in th back and on bumps, trimmed plastic arch and removed bolts, need to trim the metal arch back

pics of the 5dr beast lol http://www.corsasport.co.uk/board/viewthread.php?tid=180239&pid=2278050#pid2278050

cough.. 5 door .. cough

im on 205/40 17's with a 60mm drop, no scrubbing

Im on coilovers but have been down 70mm on 16 x 7's et45 with 195/40 rubber. All I have done is remove the top arch bolts front and rear and slightly trimmed the black plasic rear arch and also the rear metal arch and I never had scrubs. piccie...

try the seach engine mate just put in somin like "16's -60mm"

mines gettin lowered -60mm on saterday on 15's et42 will proberly rub but not much!

hi,
can anyone tell me whether it is possible to lower my corsa sport 1.6 yr2000 60mm and put 16" wheels on it without any arch rubbing.
i have 17" on it at the moment with et35 and it rubs on every corner.
want to get a new set of wheels of weekend just wanna make sure theres no rubbing - has anyone lowered on this size wheel + if so what size measurement are wheels and tyres i.e 195/40/16 - 16 x 6.5 etc.
cheers