|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » CORSA CLOCK REV METER » Post Reply
|
Dark_Shelley |
posted on 19th Oct 04 at 13:08 |
cheers peeps | |
uprated |
posted on 18th Oct 04 at 23:03 |
its worth nicking a proper contact from a scrapyard cos otherwise they are a bastard and lose contact all the time, no matter how well you shape and solder | |
Corsa^Dan |
posted on 18th Oct 04 at 22:53 |
5th slow i was right then :) | |
uprated |
posted on 18th Oct 04 at 22:48 |
yep rev with a multimeter on the greene wire on ECU, then attatch a wire to that wire on EC, feed this to the 5th slot from the left on the top row on the clockset block | |
Corsa^Dan |
posted on 18th Oct 04 at 21:03 |
np :) | |
Dark_Shelley |
posted on 18th Oct 04 at 19:44 |
????????? | |
J da Silva |
posted on 18th Oct 04 at 18:53 |
Pics? | |
AdamF |
posted on 18th Oct 04 at 18:12 |
no problem :thumbs: | |
Dark_Shelley |
posted on 18th Oct 04 at 17:58 |
:wave::thumbs::lol: | |
Dark_Shelley |
posted on 18th Oct 04 at 17:58 |
Effing genious's the lot of ya | |
AdamF |
posted on 18th Oct 04 at 17:45 |
the ecu is behind the kick panel in the drivers foot well. tap in to the green wire with a multimeter and rev the car if the revs increase this is the wire then run in to the rev counter and it should work | |
Dark_Shelley |
posted on 18th Oct 04 at 17:41 |
where bouts on the ecu m8. | |
Corsalad87 |
posted on 18th Oct 04 at 17:11 |
i ran my revcounter wire for my digidash from the ecu!!!!! | |
Corsa^Dan |
posted on 18th Oct 04 at 17:03 |
iirc its the 5th slot form the left on the back of the plug behind the clocks :) | |
Dark_Shelley |
posted on 18th Oct 04 at 16:59 |
cheers m8 | |
ed |
posted on 16th Oct 04 at 20:05 |
I'll answer your question for the thrid time :lol: | |
Dark_Shelley |
posted on 16th Oct 04 at 17:38 |
lol | |
AdamF |
posted on 16th Oct 04 at 17:36 |
nor am i :lol: i dont honestly no with out looking some one may no | |
Dark_Shelley |
posted on 16th Oct 04 at 17:35 |
so it goes from the rev meter to the negative on the ignition coil. | |
AdamF |
posted on 16th Oct 04 at 17:29 |
on my mates nova i wired it to the negative on the ignition coil, it should work on the corsa too but ive never tried it so you could try that. | |
Dark_Shelley |
posted on 16th Oct 04 at 17:24 |
CHEERS M8 | |
AdamF |
posted on 16th Oct 04 at 17:18 |
yeah some corsas have a green wire taped in the loom others dont, if there isnt one youll need to run a wire from the rev counter but i dont no where it goes after that sorry :lol: | |
Dark_Shelley |
posted on 16th Oct 04 at 17:17 |
I GOT A CORSA B 1.2 8V AND PUT A SET OF CLOCKS WITH A REV METER IN. |