|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Any 1 know the inlet diameter for a c20xe? » Post Reply
|
Joff |
posted on 14th Oct 04 at 13:53 |
Yes, she was worn out. | |
Adam_B |
posted on 14th Oct 04 at 13:44 |
quote: my mother she is dead | |
LukeGSi |
posted on 14th Oct 04 at 12:28 |
:| | |
Joff |
posted on 14th Oct 04 at 12:27 |
Your momma is quite tight in the downstairs dept. | |
Adam_B |
posted on 14th Oct 04 at 11:11 |
im sure mines smaller, its quite tight on the air flow meter | |
Joff |
posted on 14th Oct 04 at 10:11 |
quote: No, I never measured the air mass meter :P:P The ID of the intake hose (76mm) is going to be larger than the OD of your air mass meter (68mm) and the OD of the air filter (70mm). For a cone filter, why not just order a filter for a C20XE? :P | |
moddedcorsa |
posted on 13th Oct 04 at 20:55 |
So what inlet diameter of cone filter do i need?? im confused | |
Adam_B |
posted on 7th Oct 04 at 21:24 |
my air mass meter is 68mm. you measured wrong. :P | |
Joff |
posted on 7th Oct 04 at 19:56 |
Mine's bigger :P | |
Adam_B |
posted on 7th Oct 04 at 19:54 |
mine is 65mm | |
Joff |
posted on 7th Oct 04 at 19:53 |
The ID of the pipe coming from the air mass meter to the filter is 76mm. | |
moddedcorsa |
posted on 7th Oct 04 at 19:36 |
Is that the inside diameter of the rubber pipe? Or the inside diameter of the cone filter? | |
moddedcorsa |
posted on 7th Oct 04 at 19:34 |
thanks alot mate, much appreciated!! | |
Adam_B |
posted on 7th Oct 04 at 19:33 |
inside diameter is 65mm | |
Adam_B |
posted on 7th Oct 04 at 19:30 |
i shall go measure | |
moddedcorsa |
posted on 7th Oct 04 at 19:28 |
As above, (tried search facility but cant find an answer) getting engine soon, but need to know the size for my induction kit, cheers:thumbs: |