|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » A couple of Q's » Post Reply
|
topshot_2k |
posted on 6th Sep 04 at 11:33 |
no new engine is a x16xe so im guna just change engine, gearbox, ecu then. | |
Greasemonkey |
posted on 6th Sep 04 at 10:19 |
looms are the same, as are drive shafts, ECU needs changing, this is if the engine is a X16XE, if ya putting the C16XE in loom will need to be changed | |
Adam-D |
posted on 6th Sep 04 at 10:10 |
use the loom that came with the new engine | |
topshot_2k |
posted on 6th Sep 04 at 10:07 |
can anyone help work starts 2moz!!! am i guna have to change my driveshafts. hubs etc for the x16xe ones? | |
topshot_2k |
posted on 5th Sep 04 at 20:43 |
ttt | |
topshot_2k |
posted on 5th Sep 04 at 20:17 |
ive got everything driveshafts, ecu loom etc etc but i have been told that x14xe loom is same as x16xe and also that driveshafts etc are also the same. | |
ed |
posted on 5th Sep 04 at 20:09 |
If possible you should use the hubs and driveshafts from the car the engine came out of. When fitting the engine you need to wire it in using the 1.6 wiring loom and ECU - it will be a complete straight swap... (though if you are keeping the original gearbox off of the 1.4 you can keep the hubs and driveshats). | |
topshot_2k |
posted on 5th Sep 04 at 20:04 |
also is X14XE ecu the same or different to x16xe one? | |
topshot_2k |
posted on 3rd Sep 04 at 18:26 |
just getting ready to drop 1.6 16v into my 1.4 16v. |