remind me tomorrow and ill look in my bros corsa, he has the omega one all wired up and working.

Please Help :(
^^^Read my post, first one at the top^^^

http://82.34.51.160/sytemsandsoftwaredevelopment/systems/automotive/How_to/how_to_summary.htm

You might find the above link helpful

Steve

test to see if you can just wire it directly to power, like you did on the battery, but with the corsa sunroof wiring (or buzz it out with a DVM to see if theres power, especially between the switched wire and ground).

If it seems all ok, then i havnt got a foggiest....best bet is to have a butchers on Mig and see if someone has done something similar, if not, put a post up and see what happens :thumbs:

It only gives an output from the MFD up to 55 kmh or something like that, thats not to say that it's stopped getting input signals at that speed, so it's worth a try...

u can try for nowt tho... as for your wiring prob.... i dont have a sunroof to play with so not got a scooby

quote:

---

Originally posted by SRi-Co
u try the two button trick then;)

---

u try the two button trick then;)

EDITED-
got a Omega one touch total closure sunroof motor and panel with turn switch..
3 of the 6 wires power the unit, so ive only wired them 3 up for now.. but i cant seem to get it to work properly?

i tried to set it by pushing in the button for few seconds but it only opens very slightly at a time no matter how far i turn the knob! and it doesnt open accordingly to the switch position, its all over the place! :(

its the second motor i got from scrappise now, so im sure its got somthing to do with setting and programming it???

:boggle:

[Edited on 27-08-2004 by MoNkEy MaGiC]