|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » got a prob with my bonnet » Post Reply
|
ed |
posted on 2nd Aug 04 at 15:21 |
Didn't you just read what TOMAS wrote? | |
Corsa^Dan |
posted on 2nd Aug 04 at 13:53 |
cpuldnt i just rub it down slightly and then add some p38 fiberglass ontop then smooth over with p40?? | |
TOMAS |
posted on 2nd Aug 04 at 12:57 |
If its pretty think i'd try rubbing it flat but the general oppinion is that filler on bonnets is a bad idea especially when bridging gaps etc and should only be used as last resort. However lightly skimming with filler should not cause too much of a problem and make sure there are NO air bubbles in the filler otherwise the trapped air will expand with the heat from the engine and crack the filler. | |
Blue_Sri |
posted on 2nd Aug 04 at 09:06 |
Cant you return the vent from where you got it? If not why not try rubbing it down then smoothing it over with fiberglass paste? Or even take it down to your friendly local bodyshop??? | |
Corsa^Dan |
posted on 2nd Aug 04 at 08:59 |
30 views no reply, some1 must no! | |
Corsa^Dan |
posted on 1st Aug 04 at 20:33 |
right ive got a bonnet skin with an F50 vent onit installed on my bonnet. |