|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » lowering » Post Reply
|
Mistamist |
posted on 1st Aug 04 at 20:05 |
See link in my sig :D | |
HeNdie |
posted on 1st Aug 04 at 19:42 |
i was curious to this aswell, u answered all my questions i didnt actually ask yet :D :D :D | |
ash_corsa |
posted on 1st Aug 04 at 19:35 |
i paid £70 for G-MAX springs from halfords, lowered 40mm, loads different, handles so much better, need spring clamps to get the springs off (front only) these were £18 from halfords. | |
Neshol |
posted on 29th Jul 04 at 14:55 |
If you fit them yourself, you will need a set of spring compressors for the fronts (bout £30), and you will prob need 2 trolley jacks so you can lower the rear beam in one go... | |
tiptoptim |
posted on 29th Jul 04 at 14:54 |
Go for 60mm apex springs. Will handle much better then standard springs. | |
L330wnz |
posted on 29th Jul 04 at 14:53 |
naa torsion bars are on clio's, saxo's etc :thumbs: | |
tiptoptim |
posted on 29th Jul 04 at 14:53 |
Yep new springs all round, or you can go for springs and shocks. Depends on how much you want to pay really. How low you thinking of going?? Then find someone to fit them for you, if you cant fit them yourself. Prices, look at larkspeed. Springs are £75 for 40mm springs or £88 for 60mm springs. (Prices from www.larkspeed.com) | |
MarkW |
posted on 29th Jul 04 at 14:53 |
60mm spring should be between £60.00 & £80.00 though eventually u will need to replace ur standard shocks..... | |
sbrown |
posted on 29th Jul 04 at 14:48 |
well cheap as poss really. Just want it to look right. So really then i need 4 springs (its not tortion bar at the rear is it like my mates Clio)? How much should i be looking to pay for the springs and fitting?:) | |
Neshol |
posted on 29th Jul 04 at 14:48 |
Depends what your budget is. You can either just get a set of shorter springs, or get a full suspension kit (uprated springs + dampers/coilovers). Full suspension kit is ideally the best solution, but will cost you anything from £200 onwards. | |
MarkW |
posted on 29th Jul 04 at 14:46 |
Springs - on standard shocks is cheapest route - tho will still handle shit | |
sbrown |
posted on 29th Jul 04 at 14:40 |
Looking to lower my 1.2 swing from its rediculous ride height coz it has gsi kit on it. Any tips on how to go about this and how much i should be looking to pay? Am i correct in thinking its a case of new springs all round and then pay someone to fit them? |