|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » C16xe owners please look in » Post Reply
|
Adam-D |
posted on 25th Jul 04 at 20:13 |
i have a spare cas sensor if you need one | |
ainsley_brader |
posted on 25th Jul 04 at 19:52 |
Well i decided to just fit it and see what diagnostics said. Just had the cambelt to do first. To do the cambelt you have to unplug the cam sensor and having fiddled about under the inlet manifold i realised that it wasnt actuall plugged in, oops, as it disappeared through the manifold i assumed it hadnt been unplugged my mistake. I also noticed while doing the cambelt that the bracket for the crank sensor was broke so that was lucky and is now replaced. | |
miles |
posted on 25th Jul 04 at 18:33 |
Do all the other sensors have plugs in them? | |
ainsley_brader |
posted on 25th Jul 04 at 11:16 |
Hope this works. | |
ainsley_brader |
posted on 25th Jul 04 at 11:00 |
Right its not icv, just been across and looked. The three wires are brown yellow and black! | |
Adam-D |
posted on 25th Jul 04 at 09:47 |
yes lots | |
ainsley_brader |
posted on 25th Jul 04 at 09:08 |
anyone got a picture of the location of the icv on a c16xe? | |
Fraser Young |
posted on 24th Jul 04 at 23:35 |
Nice looking engine though :look: lol | |
Adam-D |
posted on 24th Jul 04 at 18:10 |
will be icv | |
ainsley_brader |
posted on 24th Jul 04 at 17:11 |
could be either tbh. Not lambda crank, cam, dispac, it is coming out near the header tank. | |
miles |
posted on 24th Jul 04 at 17:05 |
No map sensor if it has a afm (C16). | |
ainsley_brader |
posted on 24th Jul 04 at 16:45 |
nope straight flat three | |
miles |
posted on 24th Jul 04 at 16:44 |
It is the charcol canister. | |
ainsley_brader |
posted on 24th Jul 04 at 16:41 |
nope wrong end of the engine, its where the map sensor is on the 1.4 but the 1.6 doesnt have map does it? | |
Adam-D |
posted on 24th Jul 04 at 16:35 |
yep that pipe ties in there somwhere if i was standing there id fit it str8 away no probs | |
ainsley_brader |
posted on 24th Jul 04 at 16:29 |
Thank yep theres two earth straps there on the loom bolting onto the alternator bracket and 1 the other end bolts to the inlet manifold, where that second one bolts up there is also a 3 pin plug coming out of the loom its that that i dont know where it goes. | |
Adam-D |
posted on 24th Jul 04 at 16:17 |
earth strap goes onto the inlet manifold where the alternator bolts up | |
ainsley_brader |
posted on 24th Jul 04 at 14:13 |
quote: Just to the right of the engine cover you can just see a blue and red plug on a little air solenoid with two pipes come of it, one goes into the inlet manifold where does the other go? Also at the back of the manifold right hand side there is a earth strap coming out of the loom and coming out the otther side the loom in the same place is a 3 pin plug, where does this go? Thanks Ainsley |