it aint coming out!! Even when i push down the small clips, i dont want to break the thing cos then i'm fooked and will have to get the soldering iron out, which is something i'd like to avoid.

quote:

---

Originally posted by --Dave--
any tricks to pulling the plug out on the back? It's a CDR500

Dave

---

any tricks to pulling the plug out on the back? It's a CDR500

Dave

took me a while, had to change wires over cause the way i wanted it was so i could turn it on even without keys in so had to change some wires which previously had both male conectors to have 1 with female

I'm having problems getting my old Head Unit out, the ISO plug in the back just doesnt want to budge!!

2h?! took me 20mins MAX

Your old stereo should have a plug which you can disconect from the standard stereo and plug into the new head unit, be careful with the radio arial plug as it is easily broken and costs a bomb to get replaced, you will also need a very small alen key to take out the screws to reveal the holes for the stereo keys. Good luck, mine took about 2 hours, you may also find the with corsa stereos the ignition and battery wires are round the wrong way.

to a corsa? its too straightforward for u 2 be asking about. once you got the headunit in ur hands, ull know what to do.

to fit a new headunit do i just match the colours of the wires?:D