|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Wiring Amp » Post Reply
|
Melville |
posted on 26th Feb 04 at 15:37 |
the passenger seats in the back. pull the seat bit that your arse sits on back so that you can see the carpet and the base of the seat belt holders and you'll see a scre holding them in place. That my friend is the screw in question | |
Sando |
posted on 26th Feb 04 at 14:08 |
Dunno, I aint got a Corsa yet! But....most people find a bolt that goes into the bodywork or chassis and bolt it to that. | |
Tom J |
posted on 26th Feb 04 at 13:40 |
what rear seat bolt? under the rear chairs is it> | |
Sando |
posted on 26th Feb 04 at 13:26 |
Earth and ground are the same thing. Just wire it to the amp and then find a suitable bolt, therear seat bolt is a good one, as long as it goes into the chassis. Just sandpaper a bit of the paint off to get a good connection. | |
Tom J |
posted on 26th Feb 04 at 13:16 |
Went out to get a wiring kit for my new amp. its 300W max i think so found the wiring kit but it doesnt have a ground wire, it has 5m of power wire and an earth cable and rca cable. do i need ground wire not sure how u wire it up. |