|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » removing standard H.U-help please » Post Reply
|
jmucorsasport |
posted on 11th Jan 04 at 21:16 |
All i used to pop mine out with was two halves of wire coat hanger folded into two prongs then in the holes in the side of the HU give them a little wiggle and out she comes with a little force applied too | |
Trucido |
posted on 9th Jan 04 at 10:31 |
its ok it sounds like you dont have any...on some versions there is lil allan key things in where you would put the pins but if you;ve got them there kinda obvious there there as you cant put the pins in | |
DangerousDave16v |
posted on 9th Jan 04 at 09:46 |
Where are the grub screws? i havent seen any? | |
Carb_Fanatic |
posted on 8th Jan 04 at 22:43 |
no! | |
T.CorsaSRI |
posted on 8th Jan 04 at 22:13 |
Basically i bought mine froma local motor sports shop which sells modded stuff like lights, gear nobs etc... | |
pmoz84 |
posted on 8th Jan 04 at 21:48 |
Be prepared for a fight, the HU didn't exactly "pop" out on mine | |
Trucido |
posted on 8th Jan 04 at 21:34 |
yeah you just push them straight in there £3.99 from Halfords | |
DangerousDave16v |
posted on 8th Jan 04 at 21:34 |
hi guys, ive tried to take out my standard h.u but am having problems.i havent got the prong thingys, but have got something which resembles one. how much are they from halfords or somewhere? |