couldnt get tigerseal or sikflex or wot eva it is anywhere.


too drill,

look under the car, u will see a lip underneith where the skirt goes up2. get 1 of the "L" brackets, mark out, and drill 1 thro the skirt and 1 thro the lip.

i did 3 along the bottom

no more nails isnt waterproof

i woulnt use no more nails, use tigre seal or stickoflex or sum waterproof felxable silicon.

just thought id say :thumbs:


james

cheers mate ur a big help, would it help to likemark it out first ye

Yup, just the clips.

I think i used one of the bigger ones for the little part of the skirt at the back.

cheers mate ill try that, is that all u used just the clips no bonding

And after all that im rippin them off to put some nice steinmetz on :lol:

It took me about a day to fit em using the clips & I only used the ones that go along the sides. (smaller ones)

I messed about for ages getting one clip on at each end of the sill, then when i was happy they were straight i drew a line from one to the other.
Then it was just a case of fixing the other clips along the line.

They didnt turn out to bad.

can u give me sum more in depth instructions like where to drill etc

ive jsut done this 2 my corsa, was quite easy (ish),

i used no more nails and a lot of self tapping screws lol, nah only about 4/side.

the hardest thing is too get um straight, i had too make my own brackets too, dont worry bout drilling into the car any mistakes will be hidden anyway

ant just use duck tape m8 they stick well gd wiv a bita that lol

when i had mine i had all the proper clips rivetted on, took nearly 2 days tho

screw them into the arch, sill and glue on under the door. thats how i did mine.

is there an easier way to fit the skirts cos it gona b a cunt drilling all the holes etc for the brackets