|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » delocked door handles » Post Reply
|
oztek corsa |
posted on 28th Dec 03 at 16:51 |
take the door card off, then undo the two 10mm bolts at the bottom of the window runner and slide the runner out. That then gives you access to the two nuts that hold handle in. Take the nuts off and remove the backing plate for the handle, unclip the old handle and remove from the door. take the lock barrel and pin out and then clip in the new handle and refit everything else! | |
boyracer2002 |
posted on 28th Dec 03 at 16:42 |
easy mate, i used jus a normal spaner jus took longer lol piece of piss :D | |
Greg_M |
posted on 28th Dec 03 at 13:47 |
do you? there is a guide in total vaux from afew months back, ive got a coppy somewhere, looks a piece of p**s. | |
Icy |
posted on 28th Dec 03 at 02:19 |
u need the angled spanners tho to undo the bolts | |
LukeGSi |
posted on 28th Dec 03 at 01:44 |
piece of piss then.......cheers!! :thumbs: | |
Colin.S |
posted on 28th Dec 03 at 01:40 |
2 bolts on each | |
LukeGSi |
posted on 28th Dec 03 at 01:39 |
How hard is it to fit vectra rear door handles to a corsa B??? |