|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » doorpin hole plugs? » Post Reply
|
Sims |
posted on 18th Nov 03 at 18:17 |
i took my passenger side door pin off. i thought about how to get rid of the whole. thought for a temporary solution i would just put black insulation tape over the hole in the plug. then pushed it back in. | |
uprated |
posted on 18th Nov 03 at 17:06 |
ah, VW stylee | |
Gambit |
posted on 18th Nov 03 at 15:42 |
^^^^^ whose a clever clogs | |
Kris TD |
posted on 18th Nov 03 at 14:58 |
i took 3 of mine out completely, but i left the drivers door pin in. however i cut a certain amount of it so that it sits flush when the cars locked, then filled in the top with some filler then just brushed a bit of black paint on the filler. | |
anz |
posted on 18th Nov 03 at 14:13 |
take the plastic thing out, fibre glass it solid then paint it. | |
uprated |
posted on 18th Nov 03 at 10:35 |
yea, thats what i thought, not gonna retrim the interior for a while though, want to retrim in black alcantara for cards and like midnight grey normal seat material for the seats, front and back. | |
carnoisseurcraig |
posted on 18th Nov 03 at 10:34 |
None that i know of mate. Looks like you will have to jam summin in the hole and re trim it. | |
broster |
posted on 18th Nov 03 at 10:33 |
u may have to retrim it. dont no of any plugs available at the moment | |
uprated |
posted on 18th Nov 03 at 10:27 |
i want to remove my doorpins, is there some plugs or something i can get to fill in the holes left over? |