|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » will ford fitments fit on corsa's » Post Reply
|
boyracer2002 |
posted on 29th Sep 03 at 12:57 |
no mate they wont go on, i bought some wheels which were for ford and saxo but i needed them because the et was 18 which i needed, i took them to a specialist in york who altered the pcd for me for £130 for 4 wheels which i thought was a bargain | |
leon_in_uk |
posted on 29th Sep 03 at 11:31 |
cheers | |
M2RTY |
posted on 29th Sep 03 at 11:23 |
quote: they will go on physicly they will sit about 11-15mm too far out (highest offset venom came in was 38) 60mm is low on 16s my 16s on 60mm were et45 and needed a lot of work to get them on | |
chrissri |
posted on 29th Sep 03 at 11:22 |
dont bother m8, its too much trouble. jus buy vaux wheels | |
Born_corsa02 |
posted on 29th Sep 03 at 11:19 |
For em to fit you'd have to take metal off the wheels if ford offset if vaux offset can lower 60mm on 16s without rubbing | |
leon_in_uk |
posted on 29th Sep 03 at 10:51 |
so tsw venoms with 4 studs 100mm wont fit when i lower my car 40mm they will rub? what do i do to make it not rub, they are only 16" tho | |
M2RTY |
posted on 29th Sep 03 at 10:40 |
quote: any rim with 4 holes in it WONT fit regardless of offset as the PCD is 108mm vaux use 4*100 pcd BUT wheels with 8 holes in the might fit, depending upon make also, the offset on ford is 35-39, with vaux being 45-49 they will stick out the arch | |
leon_in_uk |
posted on 29th Sep 03 at 10:38 |
cheers, corsas are 100mm from the lockin holes int they??? | |
OFcorsa |
posted on 29th Sep 03 at 10:35 |
i doubt it mate if the alloys are 35 ET then no. you really want 45 or 49ET for a corsa but 42ET is acceptable. | |
leon_in_uk |
posted on 29th Sep 03 at 10:15 |
as above a ford 4 stud fitment will alloys fit on my corsa?? |