corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » DIY single wiper... » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

TOMAS

 posted on 27th Sep 03 at 08:58

MIG, TIG, STIG, whats ordinary then?


Darrylh

 posted on 27th Sep 03 at 07:39

This DIY on the SA site was done by myself.

I used an ordinary welder, after grinding that gold colour stuff away, and then i think i used a 2" longer blade than the normal stadard blade.

This works 100% fine. i have had no problems. Not even with PIGS :)


paulr202000

 posted on 25th Sep 03 at 22:49

has anyone done this if so is it really any good, did you use the origonal arm, what size blade did you use and how did u blank off the other hole any help would be perfect thanks


Adam-D

 posted on 24th Sep 03 at 15:54

^^


Adam-D

 posted on 24th Sep 03 at 09:45

cheers that cool
wonder what welder he used?


-Aliba-

 posted on 24th Sep 03 at 09:31

http://forum.opelownersclubwc.co.za/viewtopic.php?t=871


PaulW

 posted on 23rd Sep 03 at 20:15

there is something similiar in the max power haynes manual


CRB 553

 posted on 23rd Sep 03 at 20:09

Does ne1 know of a website that shows how to do this, there was one posted on here a while back.....

I can remember u need to cut 10mm out of the linkage but i wanna make sure b4 i go and do it

Cheers