DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
Can anyone give any info on fitting one to a c20let? I can understand my instructions  or pics of what pipes go where
I have got a general idea but nothing concrete
Thanks in advance 
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
am i going to need one of these ?
[Edited on 04-07-2007 by DAZ1985]
|
vxlgsi
Member
Registered: 28th Aug 03
User status: Offline
|
if you have a blanking plug fit it... then fit the fpr into the return line.. job done
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
So....
Remove return pipe
Plumb that into fpr
Then....
From fpr outlet back to the fuel rail
Blank off where existing regulator went?
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
you put the blanking plate on were the standed regulater goes. this inturn blanks off the old return line on the baclk of the rail so you can just leave that with no hose on it. run a hose from the new outlet on the blanking plate to the regulator. then another hose from the regulator outlet to the standed return hose that used to plug in the rail. the inlet on the regualtor is the one on the side and the return is the one on the end opposite the vacum bit
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
Sorted, i've nearly finished making my blanking plate at work so weather permiting ill be having a crack at it this weekend
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
make sure u use o rings or it WILL leak!
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
yes im using o rings
|
