|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Projects and Builds » My Corsa Sport Project » Post Reply
|
A20EXW |
posted on 31st May 10 at 01:49 |
well the day has finaly come x14xe expired bottom end went, soo out it comes | |
A20EXW |
posted on 12th May 10 at 23:00 |
just a small update, ive tidyed engine bay up took most off the sound proofing off the bulk head had the inlet off cleaned up, painted up and put back on, tidyed up the engine loom and removed the rotten heat sheild off the manifold, | |
A20EXW |
posted on 3rd May 10 at 23:38 |
the tigra arms ive got one is slightly shorter with a kink in where the passangers one is stright and longer if this helps but then again mine might be dodgy lol | |
cjohnson |
posted on 3rd May 10 at 18:22 |
Oh right, the ones on the tigra that I got must be dodgy then lol. Corsa arms, one is longer than the other, whereas the arms I got are the smae length lol | |
A20EXW |
posted on 3rd May 10 at 18:18 |
only diffrance i noticed was the drivers side arm has a slight kink in it soo it sits in line with the kink on the scuttle pannel i just used my same flat blade wipers which i got for the corsa there close but dont touch | |
cjohnson |
posted on 3rd May 10 at 16:19 |
I have corsa ones on mine atm, but to get them to sit nice and low on the windscreen, they end up touching the panel, and hitting it every time the wipers are on. So whe I was at scrappy looked at a Tigra and the arms were sifferent. | |
johnny86 |
posted on 3rd May 10 at 13:14 |
do you have to change the wiper arms if you fit a tigra scuttle panel?? | |
cjohnson |
posted on 3rd May 10 at 12:38 |
Are the wipers different to go on the tigra wiper arms mate? I have tigra scuttle, and got some tigra wiper arms last weekend, but my 2x 18" wipers from the corsa wipers cross in the middle. I'm thinking a 16" driver's side wiper will do the trick? | |
A20EXW |
posted on 3rd May 10 at 12:18 |
small update fitted grill and tigra wiper arms and scuttle pannel | |
Mark.W |
posted on 2nd May 10 at 13:03 |
That does look very clean mate. | |
A20EXW |
posted on 2nd May 10 at 12:20 |
Just a small update been to a local scrappy and for the sum off £20 i got a tigra scuttle pannel with wiper arms corsa b mud flaps in really good nick and a spare tier (mine was missing) | |
Ingham |
posted on 30th Apr 10 at 14:57 |
Looks gorgeous :) | |
A20EXW |
posted on 30th Apr 10 at 12:59 |
ive gave mine greef for 6-7 months untill it got written off (bloke crashed into the side off me) only think i have to replace was a crank sensor but its like all engines you get good ones and bad ones its just the luck off the pick really, and the x20xev has the same block as a c20xe soo same mounts ect its just like fitting a redtop, | |
johnny86 |
posted on 29th Apr 10 at 21:05 |
are they reliable and same difficultly to fit?? | |
A20EXW |
posted on 29th Apr 10 at 20:45 |
135bhp x20xev standerd mines got a few tweeks and its pushing around 147bhp soo its about the same | |
johnny86 |
posted on 29th Apr 10 at 19:53 |
bloody clean car mate and what sort or power does a x20xe put out bit different from redtop | |
A20EXW |
posted on 29th Apr 10 at 18:12 |
it was pink it has been g3ed then colour t coated and polished with auto glem 2-3 times took me 2days to get it back red, it does have some damage on drivers quater where some one has kicked it i think and the roof has a ripple in it where the bonnet came up on my mate ages ago but im going to book it into a local body shop and get these small things sorted out ive also got calibra v6 brakes for it, | |
Adam C |
posted on 29th Apr 10 at 18:05 |
Thats pretty damn clean, after being stood up for that time I would have expected it to go pink but thats come back really well and proper red:cool: | |
A20EXW |
posted on 29th Apr 10 at 17:56 |
Hi all im new to corsa sport im a member off mk3oc but After my Astra GSi ph2 got written off i bought a corsa sport off a mate off mine for not alot off pennys, its been parked up for 18mths and un taxed i polished it up and fitted a post 97 front bumper |