|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Projects and Builds » my wee 1.0 project » Post Reply
|
sri_davie |
posted on 7th Feb 08 at 01:16 |
id say its no worse then any the others its just takes a wee bit longer on the wiring, but its not difficult | |
COR54 801 |
posted on 6th Feb 08 at 23:04 |
So would you say that buying a 1.0 ltr,is LESS hassle than any other litre of corsa,bud? (2.0 ltr+ conversion) Thinking of attempting this myself-with help in the future,just looking for a bit of info! | |
d4nNy |
posted on 6th Feb 08 at 21:26 |
love it,very nice mate.my cousin littl_duke has u2u'd you about bumpers | |
sri_davie |
posted on 6th Feb 08 at 18:41 |
gave the corsa a wee clean out today, managed a full wheelie bin of rubbish from the back so all the seats are all folded back in place for the first time since i got it, the story so far i got the corsa for free and the engine for free but then i needed mounts so corsabid to the rescue got the mounts and a set of shafts off him which was a great help, while iwas there i bought the front suspesnion casing that he had from a v6 cavalier which still had there hub flanges and brakes fitted, also got the full rear brake setup which he unbolted from the cavy axle as i wanted (nice one) so with a spare gsi corsa rear axle that i have im going to so a rear disc conversion and get the front 5 stud flanges machined to fit the corsa wheels bearings so i can have discs all round and 5 studs, once its on im going to get some 5 stud alloys(maybe calibra turbo wheels) if i can get a set and also a set of 15" vectra steelies which im going to get powdercoated so that there easier to clean up after the long haul drives to crail etc so hoping to get it as sleeper like as possible but time will tell, but aying that it was a bit warmer today | |
sri_davie |
posted on 4th Feb 08 at 18:20 |
yeah lol a bit of warm weather so my hards dont tuern to ice when im fitting the matrix hoses and the rest of the bits | |
ShEp |
posted on 4th Feb 08 at 13:56 |
quote: hopefully it will start moving a bit faster as its getting a bit warmer up here during the day :lol: your hoping good wee project :thumbs: | |
sri_davie |
posted on 4th Feb 08 at 13:38 |
yeah used allcorsa for a while | |
Ste L |
posted on 4th Feb 08 at 13:33 |
your off allcorsa right? | |
sri_davie |
posted on 4th Feb 08 at 13:28 |
lol hope so, i didnt want another corsa this one became my 15th corsa but i stupidly sold my gsi before christmas and missed it so i got given the r plate 1.0 shell for free with 67k on the clock and also got given the xe for free which has 77k on the clock on the preoblem with the xe is it need a clutch and water pump but thats a nice excuse for a full timing belt kit and preformance clutch | |
FruitBooTeR |
posted on 4th Feb 08 at 13:25 |
:! sleeper in the making | |
sri_davie |
posted on 4th Feb 08 at 13:24 |
been on here for a few years and went through many corsa's but ive never wrote a project thread so heres my first |