|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Wot power from a.... » Post Reply
|
vibrio |
posted on 29th Jul 03 at 07:43 |
yes don;t get regal to do it :lol: | |
Andy |
posted on 29th Jul 03 at 07:41 |
quote: Webber-Alpha TBs aren't really that rated as far as I know. I was advised to steer clear. SBD's TB's taper TBs are very well matched for that engine, and would be my first choice. As for ECU, MBE (as supplied by SBD) is well thought of, but there others such as GEMS (what I use) and Motronic (a bit dearer, but very fast processors and very responsive). The important thing is that whatever ECU you buy, you get someone who REALLY knows the system to do your mapping. Hope this helps. | |
Andy Morley |
posted on 28th Jul 03 at 23:16 |
:thumbs: | |
BeArDy |
posted on 28th Jul 03 at 22:30 |
best man to ask the Questions is eather | |
Andy Morley |
posted on 28th Jul 03 at 22:22 |
gunna take a look round mig now | |
Joff |
posted on 28th Jul 03 at 22:06 |
I believe some SBD kits do have cold start, depending on application. | |
vibrio |
posted on 28th Jul 03 at 22:06 |
quote: what about the block :boggle: also why a crap black diamond clutch :boggle: | |
Andy Morley |
posted on 28th Jul 03 at 22:03 |
quote: well i was told sbd dont have cold start dabilas are just shite not heard much about webber | |
Andy Morley |
posted on 28th Jul 03 at 22:02 |
This is the whole list of new stuff i'm thinkin about for conversion: - | |
Joff |
posted on 28th Jul 03 at 21:58 |
Weber. | |
vibrio |
posted on 28th Jul 03 at 21:57 |
well that is already mapped etc | |
Joff |
posted on 28th Jul 03 at 21:57 |
Then you should have listed the stripes in your list too. | |
Andy Morley |
posted on 28th Jul 03 at 21:57 |
quote: been lookin at SBD but beardy told me i'd be better off with Webber and Webber Alpher management | |
Andy Morley |
posted on 28th Jul 03 at 21:55 |
quote: gold paladium plugs also ive been told viper stripes will add 40bhp | |
vibrio |
posted on 28th Jul 03 at 21:55 |
you;d probably be cheaper fitting TB's | |
Joff |
posted on 28th Jul 03 at 21:55 |
quote: So you include lifters but not rod bolts? :rolleyes: | |
Andy Morley |
posted on 28th Jul 03 at 21:53 |
quote: if ya on about rod bolts, yeah but i didnt include em | |
vibrio |
posted on 28th Jul 03 at 21:51 |
quote: if you have splitfire plugs they will add 10hp p.s I doubt you;ll need the FSE valve if your mapped with a unichip. also the BMC is restrictive. I would probably suggest 175hp | |
Fad |
posted on 28th Jul 03 at 21:50 |
not really 170 seems about right and with raising the rev limit wont u consider uprating the rods? Woulding really consider raising it above 7500 really :! | |
Joff |
posted on 28th Jul 03 at 21:49 |
You asked. | |
Andy Morley |
posted on 28th Jul 03 at 21:48 |
surely ya would get more power than 170 | |
Joff |
posted on 28th Jul 03 at 21:47 |
170bhp | |
Andy Morley |
posted on 28th Jul 03 at 21:46 |
C20XE with; |